Network Sealing Solutions

Sealant Type

Closure Sealant

7.01.13

Airblock

100_0044

Moisture Barrier

7.08.01 6B Resin

Duct Sealant

TurkMastercastphotos 007

Pole / Cavity Sealant

7.01.7

Product Range 1) Dexbond
2) 9B Sealant
1) Dexblock
2) PBCS
3) Vertical Cones Airblock
1) 6C – Resin for Sealing the Base of Cabinets 1) 14B
2) Dexbond
3) Mastercast expanding foam
1) Pole Sealant
Purpose 1) Seal around cables
2) Physical barrier for components housed within closure
3) Cable Retention
1) Physical block / barrier against moisture / water / contamination / air / gases
2) Can be installed horizontally or vertically
1) Physical block / barrier against moisture / water / contamination / air / gases
2) Can be installed horizontally or vertically
1) Sealing cables within ducts to ensure cable retention and physical block against contamination
2) Providing additional structural integrity
1) Seal cavities to provide additional structural integrity
2) Prevent ingress of contamination

Issue: The probability of water ingress increases with the number of cable ports in the closure / network component installed along the network. There is an increased rate of corrosion of the Connectors within wet joints. Ultimately this results in faults.

Solution: Dexbond 10B sealant is an excellent solution to seal cable ports in ready access and heat shrink closures. Key features of this solution include:

  1. Unique Sealant Product/Solution: Seals all types Legacy Type Closures & Cables. Multiple formulations allow it to be adapted to suit all environmental and network conditions. Dexbond is a more effective, easier to use, faster setting product with multiple applications. Existing epoxy resin is slow setting, not user friendly and because of this is not used effectively.
  2. Intrinsic product characteristics: include high cable bond strength, quick gel time, flexibility, flame retardant, high temperature tolerance and water resistance.
  3. Effective more user compliant bespoke solution: keeps moisture out of network, which is the key cause of faults.
  4. Testing Accreditation: Only Solution available globally capable of repairing the Network to an acceptable Design Standard. Long term durability and stability in closure over the life of the closure. (LN450 BT Test).
  5. Health and Safety: Meets all Requirements.
  6. Testimonials: Has been used to seal telecommunications networks since 2000 with strong performance track record.